These balls are the same size as used in our Standard Armatures (8mm) but have the same sized thread as our Professional & ProPlus Armatures (M3). This means that they can be used to incorporate both sizes of joint in your armatures. They are particularly useful for adding a rigging block to a Standard Armature enabling our Rigging System to be used.
This fixed ball joint is made from stainless steel and is used in our ProPlus armatures. It has one pivot point and can be tensioned using the torx head screw. The balls are 6mm with an M3 threaded hole.
1 x 6mm M3 Threaded balls 1 x Professional fixing component 1 x Threaded plate 1 x Countersunk plate 1 x C/S Torx screw
These balls have a threaded through hole and are used in our Standard Armature's fixed joints. They can also be used to make ball joints, but their motion isn't as smooth as that of our threaded balls.
An excellent component allowing for the addition of rigging to your armature. The rigging block includes 5 M4 threaded holes into which our rigging system can be attached. Comes as standard on our ProPlus armatures but can be used with our Professional and Standard Armatures*.
1 x Rigging block
Professional Armature ProPlus Armature ProPlus Quadruped *Standard Armature (With the addition of 3, 8mm M3 threaded balls and a length of M3 threaded rod)